BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Chambered Makore
Highly figured Quilted U.S. maple carved top
Makore 3 piece laminated neck through
Indian Rosewood with M.O.P. dots
25” scale
Neck through
H.S.S.  SD JB bridge and ’59 single buckers
2 tone, one volume, 5 way  coil splits & bleed
Burgundy stained top, bursted outside, faux binding, traditional carve and double bound edge between body and top cap. Quilt_Maple_Carvetop_progress.html
 Queensland Maple
Figured Tasmanian Myrtle carved top
Queensland maple 4+2 headstock design
Wandoo bound with ebony
25” scale
Set neck with clean access joint
Golden age vintage calibrated set.
5 way selector volume, tone. coil splits
custom 12th fret Sun inlay using paua.
Dual carved lines, sunburst top, faux binding
and double bound  body and top cap edge.Myrtle_Carvetop_progress.html
Gentle figured chambered Blackwood
Flame sheoak carvetop ‘traditional’
Blackwood 3 piece laminated
Ebony
25” scale jumbo frets
Set Neck
Mick Brierley custom pickups , 3 way toggle,
volume, tone treble bleed and coil splits.
Wilkinson Tremolo 
custom 12th fret  ‘raging fires’ inlay using bloodwood. Raging_Fires_progress.html
Queensland Maple
Queensland Walnut q/sawn top and back
Queensland Maple 6 in line 14 degree head
Ebony ,medium frets
24 3/4”  non bound 
Semi-hollow  neck through with f-hole
SD JB bridge Jazz neck , 2 vol, 2 tone
3 way
Tele looks with short scale feel
true semi hollow construction with tone ports
Schaller roller bridge Neck_Thru_Tele.html
Blackwood with purpleheart laminations
Tiger myrtle carvetop firebird
Blackwood high figure with purpleheart lams
Figured Wandoo bound with ebony 
25” stainless steel jumbo frets.
Neck through 
Mick Brierley custom pickups, 2 vol. 2 tone,
3 way, coil splits and treble bleed cap.
Custom ‘Firebird’ 12th fret inlay using recon stone.  The only true carved top firebird built. This is definitely one rare ‘bird.Firebird_Carvetop_progress.html
Blackwood back and sides body construction
Blackwood
Blackwood  3+3 headstock
Pacific Blackwood

Set neck bent sides constructionBlackwood_Singlecut_bent_sides.html
Tassie Myrtle Bent Sides with a centre core
Tiger Myrtle top and Tassie. Myrtle back
Blackwood Neck
25” scale Honduran rosewood
Set neck bent sides semi- hollow
TV Jones classic plus (bridge) 
TV Jones classic         (Neck) 

Custom binding to top and back
Shanes_Tiger_Myrtle_Bent_sides_Singlecut.html
Figured Queensland Maple
Solid billet (as above)
Blackwood 3 piece laminated
She-oak double bound with she-oak/ebony
25”    jumbo frets
Set neck
GFS FatPaf calibrated set  
3 way toggle, volume and tone

Tunomatic string though and extra double bound headstockBreakaway_progress.html
COMPLETE    ( 32 build photos )Raging_Fires_progress.html
COMPLETE     ( 59 build photos )Quilt_Maple_Carvetop_progress.html
COMPLETE    ( 87 build photos )Firebird_Carvetop_progress.html
COMPLETE    ( 38 build photos )Duellist_progress.html
COMPLETE     ( 100 build photos )Neck_Thru_Tele.html
COMPLETE     ( 30 build photos )Myrtle_Carvetop_progress.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Queensland Walnut
figured Tasmanian Oak dual carved top 
Qld Walnut 3 piece laminated
Ebony frame bound using maple, paua dots
25”  Scale  Jumbo frets
Neck through chambered body
Seymour Duncan set  JB bridge Jazz neck
3 way toggle,volume, tone
A custom dual-carved top to match the ‘Duellist’ custom body shape. 
A gentle nitro burst and faux binding edgeDuellist_progress.html
 
( 13 build photos to date )Blackwood_Singlecut_bent_sides.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Blackwood  back and sides body construction
Blackheart Sassafras 6mm 
Blackwood Set neck
Striped ebony
25”    with 12” radiussed f/board
back and sides body construction hollowed
3 way toggle, volume, tone, 2 minis for coil taps and
series/parallel options  Brierley pickups
Paua,MOP and blue recon. stone ‘chakra wheel’ inlay 

Ebony Neck Heel,  Magnetic ebony truss rod bulletBlackheart_Sassafras_semi-hollow.html
COMPLETE     ( 85 build photos )

Blackheart_Sassafras_semi-hollow.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

COMPLETE    ( 38 build photos )Breakaway_progress.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Blackwood  back and sides body construction
Blackheart highly figured 6mm top  / plain back
Blackwood Set neck
Honduran Rosewood
25”    with 12” radiussed f/board
back and sides body construction hollowed
Mick Brierley pickups  3 way toggle, volume, tone

shell f/board markers
Ebony Neck Heel,  Magnetic ebony truss rod bullet
Burst to outside of topMicks_Blackwood_bent_sides_singlecut.html

Highly figured Quilted U.S. maple carved top
Flamed maple 3 piece laminated neck through
Macassar Ebony 
25.5” scale
Neck through, hipshot hardtail, 
Mick Brierley  Pickups
1 tone, one volume, 3 way toggle
 bursted outside, faux binding, traditional carve
Inlay Brads_Quilt_maple_neckthrough_carvetop.html
COMPLETE     ( 128 build photos )

Brads_Quilt_maple_neckthrough_carvetop.html
COMPLETE     ( 134 build photos )
Micks_Blackwood_bent_sides_singlecut.html
Bent sides Qld walnut with a florentine cutaway
Blackheart Sassafras  
U.S. walnut   with maple centre lamination            
Macassar Ebony bound natural edge
34”
Neck through with large bent sides body
Bartolini Quad coil soapbar with preamp   

extra deep body 70mm to 80mm
6 string bass with bone nut and  saddle
Ebony bridge.    Oil finishLiams_6_string_Bent_sides_Bass.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

GIDON’S Black Sass bent sides SC

GRANT’S Aussie Carve Top Firebird

MICHAEL’S hollow neck thru Tele

BRAD’S ‘Blade’ neck thru carve top

COMPLETE       ( 133 build photos )Liams_6_string_Bent_sides_Bass.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS


COMPLETE     ( 115 build photos )
Shanes_Tiger_Myrtle_Bent_sides_Singlecut.html
MICK’S blackwood bent sides

IAN’S Quilt Maple Carve Top

SHANE’S Tiger Myrtle bent side SC

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Modified Destroyer multi laminations
Jarrah Burl Drop top/ Mahogany back wings
Flame maple/Purpleheart/mahogany 
Bocote natural bound with sterling markers
25” scale  24 stainless steel jumbo frets
Neck through chambered body.  zero nut
Brierley custom pickups. 2 Vol, 2 tone & toggle

Belly carve, multi back laminations .
Strandberg Headless needle-bearing trem system. Headless style locking trem design.
The neck has a headstock with hollow.Michaels_Custom_Neck_Thru_Destroyer.html


   COMPLETE   ( 184 build photos )
       

    Michaels_Custom_Neck_Thru_Destroyer.html
LIAM’S BASS 6 STRING Bent Sides
Michael’s Neck Through Destroyer Michaels_Custom_Neck_Thru_Destroyer.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS


   COMPLETE  (208 build photos )
       

    Tobys_Bent_Sides_Doublecut_Carvetop.html
Bent sides hollow double cut shaped build
High figure Blackwood Carved top and back
Birdseye maple set neck & F/Board
3+3 headstock with Blackwood headplate
Birdseye F/B with birdseye binding 
25” Set neck, Blackwood bound f-holes
Gold Hannes bridge, Gold Sperzel tuners and Gold EVO Frets.  Brierley humbuckers
 Birdseye binding all around body.
Opal custom bullet .  Burst to the bodyTobys_Bent_Sides_Doublecut_Carvetop.html

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS

Bent sides  tweaked BB-1200 shape
Carved and hollowed Jarrah top and back
Blackwood/black maple  laminated set neck 
3+3 headstock with Jarrah headplate
Ziricote F/board with Ziricote blind binding 
24.5” Set neck, Cello style f-holes
Chrome Tunomatic and stoptail bridge,  Chrome tuners and SS Frets. Ziricote binding all around body.
custom hand cut fret markers/inlay.Craigs_Bent_Sides_Semi-Hollow.html

   
    COMPLETE   (176 build photos )
       

    Craigs_Bent_Sides_Semi-Hollow.html

Toby’s  ‘OPAL’

BODY 

TOP/BACK               

NECK                  

FRETBOARD       

SCALE                 

CONSTRUCTION

ELECTRICS


CUSTOM OPTIONS


              Updated 
       (141 build photos )
       

    Chriss_Custom_neck_thru_carvetop.html
Craig’s Bent Side Semi-Hollow
Double cut neck thru
25” scale  multi laminated neck  
Blackwood/padauk/purpleheart/maple lams 
Birdseye maple /blackwood bound board
Blackwood framed sine wave inlay
Gold fretwire (22 frets) and Schaller hardware 
Brierley custom wound Humbuckers
Carved top body with sculpted back
Schaller 2000 tremolo bridgeChriss_Custom_neck_thru_carvetop.html